In order to build a professional angle steel transmission tower, each process is crucial. In the process of constructing an angle steel transmission tower, the installation of angle steel is a key step. After the angle steel tower is inserted into the angle steel, the angle steel can be adjusted by professional tools. It is necessary to master the professional method for adjusting the angle steel. Generally, it is mainly divided into the adjustment of the diagonal half-opening of the angle steel, the adjustment of the angle steel torsion and the adjustment of the angle difference of the angle steel. After all the adjustments are made, the angle steel can reach the design position.
How to adjust the angle steel transmission tower after inserting the angle steel
First, the adjustment of the diagonal half-opening of the angle steel
After the angle steel transmission tower is inserted into the angle steel, the diagonal half-opening of the angle steel should be adjusted in time. The adjustment should be carried out according to the steps. Generally, the theodolite should be used to align the angle apex with the theodolite in the direction of the base diagonal direction. The measurement is carried out, and the adjustment of the diagonal half-opening is completed by the angle steel wire and the upper fixing device.
Second, the adjustment of the angle steel twist
When constructing the angle steel transmission tower, one corner of the triangular plate should be halved, and the angle should be closely attached to the two sides of the insert angle steel, and the azimuth should be aligned with the base diagonal direction, and the angle steel wire and the upper part The fixed tool adjusts the torsion of the angle steel. If the angle bisector of the triangle and the vertical line of the theodolite telescope overlap each other, the angle steel is not twisted.
Third, the adjustment of the angle difference of angle steel
The height of the angle can be measured by steel ruler and theodolite. The height can be adjusted by the bottom support screw. When the terrain conditions are limited, the slant range method can be used to measure the height of the angle and find the position suitable for installing the theodolite. Check and check again, the adjustment can be accurate, so that the angle steel transmission tower can play a better role and avoid big mistakes caused by small errors.
In the face of huge angle steel transmission towers, many people are curious about the price of angle steel transmission towers. The angle steel towers are large in engineering and the cost is indeed high. The installation of each part of the angle steel tower is extremely critical. The insertion of angle steel is essential. step. In order to make the angle steel work better in the angle steel tower, it is necessary to adjust the angle steel. The adjustment of the angle steel is extremely fine work. The above three steps are indispensable, so as to ensure the accurate position of the angle steel in the angle steel transmission tower.
If you are interested in our products, please contact us.（http://www.gte-cn.com/）